Multipart

Multi Part Paver Infill Covers (Gastight)

Multipart units combine standard size covers in multiple rows, generally when the clear opening exceeds 1200mm in both directions.

There are 1000’s of combinations available, the following pages provide the most common sizes and load requirements. If the size you require does not appear here, please call our technical team on 1300 885 295. Mascot Engineering will design your multipart and provide the relevant engineering support as needed.

Mascot Engineering’s system relies on a number of ‘rows’ of covers divided by fixed or removable beams to achieve the desired clear opening. The beam size will depend upon the load rating as well as the beam’s length. In all cases unless requested, beams are supplied cut to length and galvanised.

Made for you

Using standard covers, all multiparts are assembled in our facility and checked for accuracy of fit and marked to assist re-assembly. They are pulled down and carefully prepared for transport to site. Please note, where possible the multiparts will be supplied/delivered assembled – this service will depend on overall size of the multipart, it’s weight and it’s destination.