Australia-wide sales enquiries | 1300 885 295

Australia-wide sales enquiries | 1300 885 295

Class B (installation)

Typical installation for pedestrian and pedal access and light vehicles for concrete surfaces

Up to Class B 2670kg nominal wheel load
AS 3996-2006

cable-pits-class-B

Notes

  • Approved for installations up to 5,000mm deep. Refer to note 5.
  • GRC MPa rating to 60Mpa @ 28days
  • When specific site conditions vary, consult design engineer/consultant
  • Risers are available
  • For installations in excess of 1,800mm deep, refer to special depth instructions: DWG No. GRCIISD
  • Any depths beyond 900mm, step irons are required at 250mm intervals, or as specified
  • For all pipe/conduit entries and riser joins, use Mascot’s two part epoxy
  • For all further enquiries, contact Mascot on 1300 885 295

Drawing No: CPGRCIICAB